[Solved]4 Connect Attiny817 Xplain Board Lcd Screen Knacro Iic 12c Twi 1602 Serial Blue Backlight Q37185495

4. When we connect ATtiny817 Xplain board with an LCD screen (KNACRO IIC/12C/TWI 1602 Serial Blue Backlight LCD Module) by an I2C protocol. please write a C code for ATtiny817 Xplain board to print your name on the LCD screen according to lecture 17 slides. (40pt) Part 2: ATtiny817 12C to Drive LCD char array1[6]”hello” char array2[6]”world” 2c txn t *t; talloca(sizeof(*t)+2 * sizeof(t->ops[0]D Step1: call 12c_init() to enable and initialize the processor’s 12C system. 2c txn_init(t, 2); Step2: for every set of 12C operations you want to execute while being bus master, create a struct of type i2c tnx t and pass it as argument to i2c post:* 2c op_init wr(&t->ops[0], 12C_ADDRESS, array1, sizeof(array1)); 2c_op_init rd (&t->ops[1], 12C_ADDRESS, array2, sizeof(array2)) *Step3: Post transaction and wait for it to complete. */ i2c post(t); while (!(t->flags & 12C TXN DONE)) You can do whatever you want here. */ sleep_mode); if (t->flags & 12C TXN ERR) ot tested Yet, please write your o ” Some error occured… else The char] world’ now contains the response to the read request. UMassAmherst ECE 231 -Spring 2019 Show transcribed image text 4. When we connect ATtiny817 Xplain board with an LCD screen (KNACRO IIC/12C/TWI 1602 Serial Blue Backlight LCD Module) by an I2C protocol. please write a C code for ATtiny817 Xplain board to print your name on the LCD screen according to lecture 17 slides. (40pt)
Part 2: ATtiny817 12C to Drive LCD char array1[6]”hello” char array2[6]”world” 2c txn t *t; talloca(sizeof(*t)+2 * sizeof(t->ops[0]D Step1: call 12c_init() to enable and initialize the processor’s 12C system. 2c txn_init(t, 2); Step2: for every set of 12C operations you want to execute while being bus master, create a struct of type i2c tnx t and pass it as argument to i2c post:* 2c op_init wr(&t->ops[0], 12C_ADDRESS, array1, sizeof(array1)); 2c_op_init rd (&t->ops[1], 12C_ADDRESS, array2, sizeof(array2)) *Step3: Post transaction and wait for it to complete. */ i2c post(t); while (!(t->flags & 12C TXN DONE)) You can do whatever you want here. */ sleep_mode); if (t->flags & 12C TXN ERR) ot tested Yet, please write your o ” Some error occured… else The char] world’ now contains the response to the read request. UMassAmherst ECE 231 -Spring 2019

Expert Answer

---

Answer to 4. When we connect ATtiny817 Xplain board with an LCD screen (KNACRO IIC/12C/TWI 1602 Serial Blue Backlight LCD Module) … . . .